【Detailed introduction】

The product is improved from FM-6301, FM-6601, high-grade extinction powder by organic or inorganic surface treatment and again, than FM-6601 based on the extinction ratio is high, high transparency, easy to disperse, oil absorption of small and large porosity, water resistance etc..
A high efficiency, extinction, there are a variety of sizes to meet requirements of coating formula particles, large particles, the higher the extinction efficiency, single distribution of narrow and symmetrical extinction efficiency is high, high grade organic extinction powder by organic or inorganic surface treatment from the again.
Two, good transparency, refractive index and extinction powder is similar to the film forming resin refractive index, extinction of transparent paint to avoid possible mist.
Three, easy dispersion, the particle size distribution control make it easily dispersed in the coatings, the standard for dissolving machine. In the 1200r/mm mixing impeller dispersed 10-15 minutes, can be fully dispersed.
Four, the film has no effect, extinction powder purity, particle integrity, ground resistance characteristics and reasonable choice of matching models, not only for the film coating adhesion weight had no effect, wear resistance, and the coating is smooth, good hand feeling, luster good consistency.
Five, use, the product is especially suitable for amino baking paint, polyurethane paint, polyester paint in the use of process directly add the appropriate amount to 1200r/mm dispersion of 10 a 15 minutes stirring impeller. Can be fully dispersed.
Recommend the use of the range of glass coating etc.